PEROX-SG

Peracetic acid bases terminal disinfectant.

Product Overview

Is a free-rinsing, peroxyacetic acid-based liquid sanitizer. This unique product offers many advantages over conventional quaternary ammonium and chlorine. There is no cell resistance build-up or foaming tendencies as associated with quats, is not as sensitive to organic or hard water conditions, and will not corrode stainless steel like chlorine. Furthermore, Perox-SG® is effective against a wide spectrum of micro-organisms and is one of the most effective sanitizers on the market. It can also be used as a no-rinse sanitizer (200 PPM). Typical applications are used by agricultural and horticultural buildings such as hog barns, hatcheries, poultry houses and all farming equipment. In addition, Perox-SG® is also used as rinse-free raw fruit and vegetable sanitizer.

Composition

Hydrogen peroxide and Peracetic acid

Mode of action

Perox-SG® stabilized hydrogen peroxide (H2O2) that dissolve in water (H2O) and release oxygen (O2). The free gaseous oxygen will scrub along the biofilm, release it and dissolve it. ACTION: Perox-SG®decomposes in O2, H2O and CO2, 3 natural elements. It leaves no residues.

  • Removes the biofilm
  • Removes scales (organic matter composed by calcium and magnesium deposits)
  • Generates a great reduction of microbial presence
  • It is equipment friendly

Presentation

5-liter plastic container

Instruction for use

For professional use only.

Dilute with water before use.

General disinfection: 1 L Perox-SG® per 200 liters of water.

Aerial disinfection (fogging): 1 L Perox-SG® per 10 liters of water.

Drinking water sanitation: 1 L Perox-SG® per 1000 liters of water.

Water system cleaning and disinfection, biofilm removal: 1 L Perox-SG® per 100 liters of water.

Storage

Store in the original container below 25°C. In a dry well-ventilated area away from sources of heat or ignition. Protect from direct sunlight.

Warnings

Do not use Perox-SG® 24 hours before vaccinations or treatments.

Use Perox-SG® only with Teflon pumps (otherwise, use a 1% dilution before passing through the pump). Heavy metals disrupt the hydrogen peroxide is suggested to avoid contact with them.

After its dilution with water, it must be used in the day.

Avoid contact with skin and eyes. Use gloves, goggles and protective clothes.

Wash well with water and change clothes after administering the product.

Warnings: First Aids

CORROSIVE. In case of contact with eyes, wash immediately with abundant water for 15 minutes.

In the case of contact with skin, wash with abundant water and call the physician. Look for medical attention immediately.

CONSERVATION: Keep in its original container, in a fresh place, protected from direct sunlight, and store at a temperature between 15º and 25ºC. Keep out from the reach of children.

WordPress Theme built by Shufflehound. Narouva | Caring with Secure | 2018 | All Rights Reserved